Commercial metal roofing systems
Metal is one of the most durable roofing choices for commercial buildings on the coast. Car washes, churches, restaurants, showrooms, warehouses and offices all use metal for its long life, low maintenance and strong wind resistance. Atlantic Roofing installs two main commercial metal systems: structural standing seam, where panels lock together with raised seams and concealed clips, and exposed fastener panels, which screw directly through the panel and are common on warehouses and agricultural buildings.
Standing seam vs exposed fastener for business
| Standing seam | Exposed fastener | |
|---|---|---|
| Weather tightness | Excellent, no holes through the panel face | Depends on fastener washers |
| Thermal movement | Clips let panels expand and contract | Fasteners can loosen over time |
| Maintenance | Minimal | Periodic fastener and sealant service |
| Minimum slope | Low slopes possible with the right profile | Usually steeper |
| Cost | Higher | Lower |
| Best fit | Retail, churches, offices, coastal exposure | Warehouses, storage, barns |
Brand color and curb appeal
Metal comes in a wide palette, so a roof can become part of your brand. The blue standing seam roof on the Crystal Blue car wash in Wilmington is a good example: the roof is visible from the road and matches the business identity. Factory-applied PVDF coatings hold color far longer than basic paints in coastal sun.
Retrofit options
Some metal roofs can be installed over existing low-slope roofs using a framing system that adds slope, or over existing metal roofs with retrofit clips. This can avoid a messy tear-off over occupied space and improve drainage and insulation at the same time. We evaluate the structure and code requirements before recommending a retrofit.
Maintaining a commercial metal roof
- Inspect fasteners, sealant and trim twice a year and after storms.
- Clear gutters and debris that can trap moisture against panels.
- Keep dissimilar metals, such as copper lines, from contacting steel panels.
- Rinse salt from protected areas on oceanfront buildings.
- Fix scratches and cut-edge rust early.
Our commercial maintenance plans cover these items on a schedule.
Commercial metal roof cost
Pricing depends on panel profile, gauge, coating, roof area, slope, height and complexity. Typical range in Wilmington: $10 to $18 per square foot. Ask us for a proposal with options.
Commercial metal FAQs
Do you work after hours or on weekends?
When a business needs it, yes. We schedule around operating hours to limit disruption.
Are you insured for commercial work?
Yes. We provide certificates of insurance on request and can name owners and managers as additional insureds.
Which counties do you serve?
New Hanover, Brunswick, Pender and Onslow counties, including Wilmington, Leland, Hampstead, Southport, Oak Island, Carolina Beach, Kure Beach, Surf City, North Topsail Beach and Jacksonville.
Can you work with our insurer or lender?
Yes. We provide the documentation, photos and scopes they typically request.
Is a metal roof loud for a business?
Over a solid deck with insulation, no. Over open framing, insulation and underlayment reduce rain noise.
Gauge, coatings and clips explained
Gauge is panel thickness; lower numbers are thicker. Commercial standing seam is commonly 24 gauge steel, which resists dents and spans framing better than thinner residential panels. Coatings matter as much as the metal: PVDF finishes resist fading and chalking for decades, while galvalume metallic coating protects the steel underneath from corrosion. Clips come in fixed and floating types; floating clips let long panels expand and contract with temperature without stressing fasteners. Those choices, combined with the wind design for your building, determine how the roof performs in a hurricane.
From proposal to completion
Commercial metal projects start with a site visit and measurements, then a written proposal with panel profile, gauge, color, insulation and warranty options. Once approved, panels are ordered to length, which sets the schedule. During installation we keep the building dry each night and coordinate deliveries and lifts with your team. At completion you receive photos, warranty paperwork and care instructions.



