What is a TPO roof?
TPO (thermoplastic polyolefin) is a single-ply roofing membrane used on flat and low-slope commercial roofs. It comes in wide rolls that are mechanically fastened or fully adhered over insulation, and its seams are joined with hot air, which fuses the sheets into one continuous surface. White TPO reflects much of the sun's heat, which helps keep buildings cooler in a coastal summer. It has become one of the most widely installed commercial roof systems in the United States.
TPO vs other flat roof systems
| System | Seams | Reflectivity | Typical life | Notes |
|---|---|---|---|---|
| TPO | Heat-welded | High (white) | 20 to 30 years | Cost-effective, widely used |
| EPDM (rubber) | Taped or glued | Low (black) unless white | 20 to 30 years | Flexible, older technology |
| PVC | Heat-welded | High | 20 to 30 years | Strong chemical and grease resistance, good for restaurants |
| Modified bitumen | Torched or adhered | Varies | 15 to 20 years | Multi-ply, common on older buildings |
| Coatings | Seamless | High | 10 to 20 years per coat | Extends the life of a sound existing roof |
How we install a TPO roof
- Survey and core cuts: we check the existing roof for wet insulation, which must be removed.
- Tear-off or recover: if the existing roof is dry and code allows, a recover over it can save money; otherwise we tear off.
- Insulation and cover board: installed to meet energy code and support foot traffic.
- Membrane: fastened or adhered according to the wind design for the building.
- Heat-welded seams: every seam is probed and checked.
- Edges, curbs and drains: perimeter metal, rooftop unit curbs, pipe penetrations and drains are flashed with TPO details.
- Final inspection and warranty: manufacturer warranties are available on qualifying systems; as a GAF Commercial Certified contractor we can offer GAF commercial warranties.
Ponding water and drainage
Flat roofs are never perfectly flat; they need slope to drains, scuppers or gutters. Water that stands for more than about 48 hours after rain shortens membrane life and adds weight. During a replacement we can add tapered insulation to correct ponding, add crickets behind rooftop units and resize drains. On an existing roof, we clear drains and look for sagging areas during every maintenance visit.
Wind and hurricane performance
Commercial roofs in coastal North Carolina are designed for high wind speeds. The biggest risks are at corners and perimeters, so we increase fastening there and use properly attached edge metal. After a storm, we inspect seams and edges first and document conditions for insurance.
TPO roof cost in Wilmington
TPO projects are priced per square foot and depend on tear-off, insulation thickness, roof height and access, and details such as curbs and drains. Typical range: $6 to $12 per square foot. We provide free proposals with clear line items.
TPO FAQs
Can TPO go over my existing roof?
Often, if the existing roof is dry and there is only one layer. We test before recommending a recover.
Is white TPO worth it in Wilmington?
For most buildings, yes. A reflective roof can reduce cooling loads during long coastal summers.
Industries that use TPO
Retail strips, medical and dental offices, warehouses, schools, churches with flat additions and multifamily buildings with low-slope sections. Restaurants with grease exhaust may be better served by PVC, which resists grease better; we will tell you which fits your building.
Caring for a TPO roof
Keep foot traffic to walkway pads, clear drains seasonally, and have seams and flashings checked twice a year. Clean, white membranes reflect more heat, so occasional cleaning keeps energy performance up.



